evocamd settings can be done by two files, /var/keys/camd_cfg, /var/keys/newcamd-client.txt.

camd_cfg is normal settings for evocamd and newcamd-client.txt is settings which give you direction to which server can be connected.

camd_cfg is not a particular case that requires to be changed often, therefore frequently used newcamd-client.txt will be explained in detail.
newcamd-client.txt can be considered as a server list. In other words, it direct your receiver to where to be connected.

If you open the newcamd-client.txt, it is set as below. Each item is similar as mgcamd and the only difference is each item can be entered in every row.

[127.0.0.1]

port = 10001

key = 01 02 03 04 05 06 07 08 09 10 11 12 13 14

username = dummy

password = dummy

[127.0.0.1]

port = 10000

key = 01 02 03 04 05 06 07 08 09 10 11 12 13 14

username = dummy

password = dummy

"[127.0.0.1]'

IP address. And you may know what is meaning of other section if you see left side of =.

If you wish to add a new server, add 5 row as below. Server information is same with mgcamd example.

[12.34.56.78]

port = 10000

key = 01 02 03 04 05 06 07 08 09 10 11 12 13 14

username = user1

password = pass1